Filter
Top Products
Chapter 6 INFORMATION ABOUT EQUIPMENT
72
e-STUDIO2050C/2550C, e-STUDIO2051C/2551C Specications
Model name
FC-2050C/2550C
FC-2051C/2551C
Type Desktop type
Original glass Fixed
Printing (copying) system Indirect electrophotographic method
Developing system 2-component magnetic brush developing
Fixing method Roller fusing
Photosensor type OPC
Original scanning system
Flat surface scanning system
(When the Reversing Automatic Document Feeder is installed: Fixed scanning system by
feeding the original)
Original scanning sensor Linear CCD sensor
Scanning light source LED
Resolution
Scanning 600 dpi x 600 dpi
Writing
Black-and-white: 600 dpi x 1200 dpi, 1 bit
Color, Grayscale: 600 dpi x 600 dpi, 5 bits
Acceptable originals Sheets, books
Acceptable original size Max. A3 or LD
Acceptable copy
paper size
Drawer
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP, 13"LG, 8.5"SQ, 8K, 16K,
16K-R
Bypass
Paper size within 100 - 297 mm (3.94" - 11.69") (Length),
148 - 432 mm (5.83" - 17.01") (Width)
Acceptable copy
paper weight
Drawer 60 - 163 g/m
2
(16 lb. Bond - 90 lb. Index)
Bypass Continuous paper feed / Single paper feed: 60 - 209 g/m
2
(16 lb. Bond - 110 lb. Index)
First copy time
(A4 or LT
portrait)
Black-and-white Approx. 8.2 seconds
Color Approx. 10.3 seconds
Continuous copy speed Refer to the Copying Guide.
Multiple copying Up to 999 sheets (digital key entry)
Excluded image
width
Black-and-white
Leading edge: 4.2 mm +2.8 mm - 1.2 mm (0.17" +0.11" -0.05"),
Trailing edge: 3.0±2.0 mm (0.12"±0.08"),
Both edges: 2.0±2.0 mm (0.08"±0.08")
Color
Leading edge: 5.0 mm +2.0 mm (0.20"±0.08"),
Trailing edge: 3.0±2.0 mm (0.12"±0.08"),
Both edges: 2.0±2.0 mm (0.08"±0.08")
Printer (Black-
and-white/Color)
Leading edge: 4.2 mm +2.8 mm - 1.2 mm (0.17" +0.11" -0.05"),
Trailing edge: 4.2 mm +1.2 mm -2.8 mm (0.17" +0.05" -0.11"),
Both edges: 4.2±2.0 mm (0.08"±0.08")
Reproduction
ratio
Actual size 100±0.5%
Zoom
25 - 400% (in 1% increments)
For the Reversing Automatic Document Feeder 25 - 200% (in 1% increments)
Paper supply
Drawer Approx. 250 sheets (80 g/m
2
,
20 lb. Bond)
Bypass Approx. 100 sheets (80 g/m
2
, 20 lb. Bond)
Exit tray loading capacity Approx. 550 sheets (80 g/m
2
, 20 lb. Bond)
Toner density adjustment Magnetic auto-toner system + Pixel count system
Exposure control Automatic plus manual selection from 11 exposure step
USB interface USB 2.0 (Hi-Speed)
Environment (for normal use) Temperature: 10 ° - 30 °C (50 ° - 86 °F), Humidity: 20 - 85% (No Condensation)
Power requirements and Power
consumption
(including optional equipments)
AC 220-240 V±10%, 8 A (50/60 Hz): 1.6 kW or less
AC 120 V±10%, 12 A (50/60 Hz): 1.5 kW or less
Dimensions (equipment only) 575 mm (22.6") (W) x 590 mm (23.2") (D) x 662 mm (26.0") (H)
Weight
e-STUDIO2050C/2550C: Approx. 57 kg (125.7 lb.) (equipment including developer and drum)
e-STUDIO2051C/2551C: Approx. 56 kg (123.5 lb.) (equipment including developer and drum)
Space occupied (equipment only) 964 mm (38") (W) x 730 mm (28.7") (D)
Storage capacity
For e-STUDIO2050C/2550C (when hard disk is installed): Max. 1000 sheets or until the
memory is full (Toshiba's own chart)
For e-STUDIO2050C/2550C (when hard disk is not installed) or e-STUDIO2051C/2551C: Until
the memory is full
• This specication varies depending on the printing conditions and the environment.
• Specications and appearance are subject to change without notice in the interest of product improvement.