Filter
Top Products
Table 2. Cong menu items (continued)
Menu item
Submenu item Selection Comments
Display Boot Display Device
• ThinkPad LCD
• HDMI
• DisplayPort
Select the display device to be
activated at boot time. This
selection is effective for boot
time, password prompt, and
ThinkPad Setup.
Intel (R) SpeedStep
technology
• Disabled
• Enabled
Select the mode of Intel
SpeedStep
®
technology at
runtime.
• Maximum Performance:
Always highest speed
• Battery Optimized: Always
lowest speed
• Disabled: No runtime
support, lowest speed
CPU Power Management
• Disabled
• Enabled
Enable or disable the power
saving feature that stops
the microprocessor clock
automatically when there are no
system activities.
Inter (R) Rapid Start
Technology
• Disabled
• Enabled
Enter after:
• Immediately
• 1 minute
• 2 minutes
• 5 minutes
• 10 minutes
• 15 minutes
• 30 minutes
• 1 hour
• 2 hours
• 3 hours
To use this feature, a special
partition on the solid-state drive
is required.
When enabled, you can enable
the 30 Day Standby function
through the Lenovo Settings
program. The function enables
the computer to enter a lower
power state after the specied
time in sleep state. Also it takes
only seconds to resume normal
operation.
Note: To use this feature,
a special partition on the
solid-state drive is required.
Power
Disable Built-in Battery
Use this feature to temporarily
disable the built-in battery. The
system will be automatically
powered off after you select
this item. Then the computer is
ready to be serviced.
Note: The ac power adapter
must bedisconnected to perform
this operation. The built-in
battery will be automatically
enabled when the ac power
adapter is reconnected.
70 User Guide