Filter
Top Products
Network Fax Guide — Installing Network Fax Software 13
This section describes about installing the N/W-Fax driver and Address Book Viewer in the
SMB environment. The N/W-Fax driver can be set up in the same connection as the printer
driver such as Parallel printing, USB printing, LPR printing, Peer-to-Peer printing, IPP printing,
and Novell printing. To set up the N/W-Fax driver in these connections, please refer to the
Printing Guide.
Installing from Client2 CD-ROM
This section describes how to install the fax client software for SMB environment which is
available for the local area network over TCP/IP.
NOTE:
• When the Network Interface Card is not installed, set up the N/W-Fax driver using
Parallel printing or USB printing. Also Address Book Viewer is not available unless
the Network Interface Card is installed. To set up the N/W-Fax driver in these con-
nections, please refer to the Printing Guide.
PREPARATIONS:
• Before installing the printer driver for SMB environment, check with your system
administrator to make sure of the following:
- This equipment is connected to the network and turned on.
- The TCP/IP setting is correct on this equipment and your computer.
Installing the fax client software for SMB connection using the
installer
The procedure here describes an installation on Windows 2000. The procedure is the same when
other versions of Windows are used.
REQUIREMENT:
• You must log in Windows as a user who has the “Administrators” or “Power Users”
privilege when using the Windows NT 4.0, Windows 2000, Windows XP, or Win-
dows Server 2003.
1. Insert the Client2 CD-ROM into the CD-ROM drive.
• The installer automatically starts and the Choose Setup Language
dialog box appears.
• When the installer does not automatically start, double-click
“Setup.exe” in the Client2 CD-ROM.
2. Select your language and click [OK].
• The InstallSheild Wizard dialog box appears.