Filter
Top Products
78
Learning the Basics
Using a DVD drive
5.375 x 8.375 ver 2.4.0
7 Gently press the disc onto the center spindle until you
feel it click into place.
CAUTION: Handle DVDs and CDs carefully, making contact only
with the center hole and edge. Never touch the surface of the disc.
Never stack discs. If you incorrectly handle the discs, you could
lose data.
8 Make sure the disc is completely on the spindle and is
lying flat on the tray.
CAUTION: If you insert the disc incorrectly, it may jam the drive. If
this happens, contact your network administrator for assistance.
9 Push the disc tray in by pressing gently on the center of
the tray until it clicks into place.
You are ready to use the disc.
Playing a CD or DVD
For information on playing a disc, see “Using a DVD drive”
on page 76.
Removing discs (CD or DVD)
To remove a disc with the computer turned on:
1 Press the eject button on the drive.
CAUTION: Never press the eject button while the drive-in-use
indicator light is glowing. Doing so could damage the disc or the
drive.
Also, if the disc is still spinning when you open the disc tray, wait
for it to stop spinning before you remove it.