Filter
Top Products
Page 4
Sending a FAX (Cont’d.)
Setting the Transmission Conditions
Originals can be sent using different transmission conditions (resolution, image quality mode,
exposure, transmission mode, original size, ECM, quality TX, Line, SUB/SEP/SID, PWD,
subject and body). Settings for the subject and body are available only when using a function
of the Internet Fax. If you change the transmission conditions, the new settings are valid for
one transmission only. They are returned to the default settings after transmission.
1. Place the original(s).
2. Press the FAX button on the control panel.
3. Press the ADDRESS button to enter the address menu,
and then press the OPTION button.
4. Press the desired buttons. Press the Prev or Next button to
switch the screens. The highlighted buttons in the screens
on the right are the default settings.
5. Press the ENTER button to complete the setting.
6. Specify the remote Fax and press the START button.
TIPS: When one remote Fax is specified by the address book,
and the OPTION button is selected, the contents of
the address setting will be reflected to the OPTION.
The settings of the TX type, ECM, quality TX, line
select, SUB/ SEP and SID/PWD selected in the
OPTION have priority.