Filter
Top Products
Page 7
Specifying the Remote Fax (Cont’d.)
Multi-Address Transmission
The Multi-Address Transmission function allows you to send the same original to 2 or
more remote Faxes in a single operation, which can be done by combining direct, address
book and group entry. Combining with the Internet Fax is also available. This eliminates
the trouble of placing the original and then dialing the number for each destination.
Multi-address transmissions must be set in the memory TX mode.
The following shows the number of destinations that can be entered according to how the
remote Fax is specified:
y By direct entry only: 400 destinations
y By address book entry only: 400 destinations
y By group entry only: 200 groups (400 destinations per a group)
y By combining direct, address book and group entry: 400 destinations
1. Place the original(s).
2. Press the FAX button on the control panel.
3. Press the OPTION button and set the transmission conditions.
4. Specify the remote Fax numbers.
y To continuously enter remote Fax numbers after
having specified them by means of the digital keys,
press the MULTI button, then enter the next number.
You do not need to press the MULTI button for the
address book or the group entry.
y The selected destinations can be confirmed by
selecting the DESTINATION button.
TIPS: To cancel the remote Fax number entered with digital keys, press the CLEAR
button on the control panel.
To cancel a remote Fax specified with address book or group entry, press the
highlighted button for the remote Fax again. To cancel all specified remote Faxes,
press the ALL CLEAR button.
To cancel a remote Fax specified with direct entry, press the DESTINATION
button to enter the destination menu, and then cancel it.
5. Specify all remote Faxes, then press the START button.