Filter
Top Products
49
Getting Started
Setting up your computer
5.375 x 8.375 ver 2.1.2
Inserting the memory module
CAUTION: Avoid touching the connectors on the memory module
or on the computer. Grease or dust on the connectors may cause
memory access problems.
11 Replace the memory slot cover.
12 Replace the screws and tighten them.
13 Turn the computer over and reconnect any cables you
removed.
14 To verify that the computer correctly recognizes the
memory:
❖ Click Start, then click Control Panel
❖ Click Performance and Maintenance.
❖ Click System.
❖ The General tab view automatically appears and
shows the recognized memory.
15 If the computer does not recognize the memory, turn off
the computer, remove the memory slot cover, and make
sure the memory module is seated properly, as described
in step 10.