Filter
Top Products
50
Getting Started
Connecting a mouse
5.375 x 8.375 ver 2.1.2
Removing a memory module
1 Follow steps 1 through 6 in “Installing additional
memory (optional)” on page 46.
2 Gently push the memory locks outward until the memory
module pops up.
3 Gently pull the memory module diagonally out of the
slot.
4 Complete the procedure by following steps 11 through
14.
Connecting a mouse
You may want to use a mouse instead of the TouchPad, the
computer’s built-in pointing device. Your computer can
accommodate only a USB-compatible mouse.
To connect a mouse, plug the mouse cable into one of the
computer’s USB ports.
Connecting a printer
You can connect a USB-compatible printer to your computer
through the USB ports. To determine if the printer is USB-
compatible, check its documentation.
To achieve the connection, you need a suitable USB cable,
which may come with your printer. You can purchase one
from a computer or electronics store.
To connect a printer:
1 Connect the USB cable to the USB port.
2 Connect the printer’s power cable to a wall outlet and
turn on the printer.
See your printer documentation for additional configuration
steps, or see “Setting up a printer” on page 61.