Toshiba T520 Projector User Manual


 
7170
Others
Specifications (Continued)
CONTROL terminal
Pin assignment
7
8
6
3
4
5
12
Signal Name
RXD
CTS
DSR
GND
RTS
N.C
TXD
N.C
Pin No.
1
2
3
4
5
6
7
8
Description
Receiving data
Consent to send
Data set ready
Signal ground
Request to send
No connection
Sending data
No connection
Mini DIN 8 pin connector
Interface format
1 Communication method RS-232C, 9600bps, No Parity, Data Length: 8 bits;
Stop Bit Length: 1 bit
2 Communication format STX (02h) Command (3Byte) ETX (03h)
Only 1 command valid per communication.
3 Data format For input commands, only ASCII-compliant all-uppercase
alphanumeric characters supported.
4 Replies Acknowledge ACK (06h) No acknowledge NAK (15h)
If commands are to be sent consecutively, wait for the response from the projector
(ACK or NAK) before sending the next command.
Main Commands
Note
Contact your dealer for control cable and other commands.
Separately Sold Product
Replacement Lamp Model TLPLW2
Note
Design, specifications, etc. subject to change without notice for improvements, etc.
Item Command
Power on PON
Power off POF
Icon display on MO0
Icon display off MO1
Auto setting (RGB input) PAT
Status display on DON
Status display off DOF
Item Command
Computer (1) input select IN1
Y/PB/PR (1) input select IN2
Computer (2) input select IN3
Y/PB/PR (2) input select IN4
Video input select IN5
S-video input select IN6
PC card input select IN7
Camera input select IN8
List of supported signals (Y/PB/PR signals)
Signal format fh(kHz) fv(Hz)
480i(525i)@60Hz 15.73 59.94
480p(525p)@60Hz 31.47 59.94
576i(625i)@50Hz 15.63 50.00
576p(625p)@50Hz 31.25 50.00
720p(750p)@60Hz 45.00 60.00
720p(750p)@50Hz 37.50 50.00
1080i(1125i)@60Hz 33.75 60.00
1080i(1125i)@50Hz 28.13 50.00
1035i(1125i)@60Hz 33.75 60.00
1152i(1250i)@50Hz 31.25 50.00
List of supported signals (Video, S-Video signals)
Video mode fh(kHz) fv(Hz) fsc(MHz)
NTSC 15.73 60 3.58
PAL 15.63 50 4.43
SECAM 15.63 50 4.25 or 4.41
PAL-M 15.73 60 3.58
PAL-N 15.63 50 3.58
PAL-60 15.73 60 4.43
NTSC4.43 15.73 60 4.43
Pin assignment of COMPUTER-1/2 & MONITOR terminals
51
10
1511
6
Mini D sub 15 Pin connector
Input Signal
RGB input
R/G/B signals: 0.7V (p-p) 75
Horizontal sync signal: TTL level (Pos/neg polarity)
Vertical sync signal: TTL level (Pos/neg polarity)
Y/PB/PR input
Y signal: 1.0V (p-p) 75
P
B/PR signals: 0.7V (p-p) 75
Do not connect anything.
Pin Pin description
No. During RGB input
During Y/PB/PR input
1
Video signal (R)
Color difference signal (PR)
2 Video signal (G) Luminance signal (Y)
3 Video signal (B)
Color difference signal (P
B
)
4 GND
5 GND
6 GND (R) GND (PR)
7 GND (G) GND (Y)
8 GND (B) GND (PB)
9 N.C
10 GND
11 GND
12 N.C
13 Horizontal sync signal
14 Vertical sync signal
15 N.C