Filter
Top Products
Tests and Diagnostics
3-152 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)
3.35.4 Error Code Status
If an error occurs during any test, one of the following error codes is displayed.
Device Name Code Status
Common FF DATA COMPARE ERROR
SYSTEM 01
03
04
05
06
07
08
09
10
ROM - CHECKSUM ERROR
ROM - SERIAL ID WRITE ERROR
ROM - NOT SUPPORTED PS-SYSTEM
ROM - SENSING ERROR(AC-ADAPT)
ROM - SENSING ERROR(1st Batt)
ROM - SENSING ERROR(2nd Batt)
ROM - THORMISTOR ERROR(1)
ROM - THORMISTOR ERROR(2)
ROM - THORMISTOR ERROR(3)
MEMORY 01
02
DD
RAM - PARITY ERROR
RAM - PROTECTED MODE NO CHANGE'
RAM - CACHE MEMORY ERROR
KEYBOARD FE
FD
F0
F1
F2
F3
F4
F5
F6
F7
F8
F9
FA
EF
ED
USB - GET DESCR.ERROR (FIRST)
USB - SET ADDRESS ERROR
HUB - GET DESCR.ERROR(Top 8B)
HUB - GET DESCR.ERROR (Whole)
HUB - SET CONFIGURATION ERROR
HUB - GET DESCR.ERROR(DESCR.)
HUB - SET FEATURE ERROR(P ON)
HUB - GET STATUS ERROR
HUB - SET FEATURE ERROR(RESET)
HUB - CLEAR FEATURE ERROR
HUB - CLEAR FEATURE1 ERROR
HUB - SET FEATURE ERROR(Enab.)
HUB - CLEAR FEATURE2 ERROR
USB - OVER CURRENT ERROR
USB - GET DESCR.ERROR(SECOND)'
DISPLAY EE VRAM SIZE NOT SUPPORT
FDD 01
02
03
FDD - BAD COMMAND ERROR
FDD - ADDRESS MARK NOT FOUND
FDD - WRITE PROTECTED