Filter
Top Products
Troubleshooting Procedures
2.11 Touch pad En-Sw Troubleshooting
To check if the computer’s Touch pad En-SW is malfunctioning or not, follow the
troubleshooting procedures below as instructed.
Procedure 1: Diagnostic Test Program Execution Check
Procedure 2: Connector Check and Replacement Check
2.11.1 Procedure 1 Diagnostic Test Program Execution Check
Execute the Touch pad test (ONLY ONE TEST) in the Diagnostic Program. Refer to Chapter
3, Tests and Diagnostics, for more information on how to perform the test program.
If an error occurs, go to Procedure 2. If an error does not occur, touch pad is functioning
properly.
Procedure 2 Connector Check and Cable Check
Check 1 Make sure the cables are firmly connected to the Touch pad En-SW board and
system board.
If the connection is loose, reconnect firmly and repeat Procedure 1. If the problem
still occurs, go to Check 2.
2-54 [CONFIDENTIAL] Qosmio F60 Series Maintenance Manual (960-796)