Filter
Top Products
4 Replacement Procedures
Minnesota 10M/10MG Series Maintenance Manual 4-21
4.7 Optical Drive Module
Removing the Optical Drive Module
To remove the optical drive module, you need to remove the expansion memory module
cover first as described in the previous section. Follow the steps below:
1. Turn the computer upside down.
2. Remove the battery and the expansion memory module cover.
3. Remove the black M2x3 screw securing the optical drive module.
Figure 4-20 Removing the optical drive screw
4. Use your hand to push the module bracket and then slide the module from the bay.
Figure 4-21 Removing the optical drive module