Filter
Top Products
4 Replacement Procedures
Minnesota 10M/10MG Series Maintenance Manual 4-49
4.19 Speakers
To remove the speakers, first remove the display assembly, keyboard, and top cover. Then
follow the steps below:
Removing the Speakers
1. Turn over the top cover. Remove three M2.5x4 screws securing the right speaker to the
top cover. Remove three M2.5x4 screws securing the left speaker to the top cover.
Figure 4-58 Removing the speaker screws
2. Unfasten the speaker cables.
Figure 4-59 Unfastening the speaker cables