Filter
Top Products
- 45 -
2.9 Installation under Windows Vista/Server2008/7/Server2008R2
(Parallel Interface with Plug & Play Enabled)
Note: If an undefined device is created after installation of the printer driver, follow the procedure described in the
section If plug-and-play installation fails under Windows Vista/Server2008/7/Server2008R2.
1. Connect the printer to the PC with a parallel interface cable.
2. Turn on the printer.
3. Set the printer parameters in the system mode.
B-SX4, B-SX4-CN, B-SX5, and B-SX5-CN
CENTRO. MODE → ECP
PLUG & PLAY→ ON
B-SA4G, B-SA4G-CN, B-SA4T, B-SA4T-CN, B-852-R, B-452-R, B-SX6T-R, B-SX8T-R, B-EX4T1-G,
B-EX4T1-T, B-EX4T2-G, B-EX4T2-T, and B-EX4T2-H
PLUG & PLAY → ON
Note: For the parameter setting procedure, refer to Section 6.2 Parameter Setting on the Printer.
4. Turn on the PC.
Note: Log on as the user with administrative privilege.
5. After the system is started, the installation of the device driver software is automatically started.
6. After a while, the installation of the printer driver is completed.
7. When the installation is completed, a new printer icon is added to the Printer folder.
Note: For the other models than the B-SX4T/SX5T, be sure to disable the bi-directional support after installing this
printer driver. For details, refer to Section 6.1 How to Enable Bi-directional Communication Support.