Filter
Top Products
- 66 -
• Occurrence
Enables specifying how often labels should be cut. If the “Strip Mode (with Back Feed)” is selected for the
Issue Mode, this feature is disabled.
•
After every page --------------------------------Cuts labels after each label is finished printing.
• After specified interval -----------------------Cuts labels after the number of labels specified in the Interval setting.
• After specified interval (Per Page)----------Cuts labels after the number of labels specified in the interval setting and at
the end of the identical copy.
• After identical copies -------------------------Cuts after the identical copy is finished printing.
• After job -------------------------------------------Cuts labels only after the entire print job is finished printing.
• After specified interval-------------------------If the special printer control (partial cut, etc.) is required, cuts labels after
the number of labels specified in the Interval setting.
Example: 4 pages are issued by 5 copies each
Cut Interval
▲: Cut operation
Every page ---
1▲1▲1▲1▲1▲2▲2▲2▲2▲2▲3▲3▲3▲3▲3▲4▲4▲4▲4▲4▲
Specified interval 3
1 1 1▲1 1 2▲2 2 2▲2 3 3▲3 3 3▲4 4 4▲4 4▲
Specified interval (Per page) 3
1 1 1▲1 1▲2 2 2▲2 2▲3 3 3▲3 3▲4 4 4▲4 4▲
Identical copies
--- 1 1 1 1 1▲2 2 2 2 2▲3 3 3 3 3▲4 4 4 4 4▲
After job
--- 1 1 1 1 1 2 2 2 2 2 3 3 3 3 3 4 4 4 4 4▲
Specified interval (depending
on the printers)
3 1 1 1▲1 1▲2 2 2▲2 2▲3 3 3▲3 3▲4 4 4▲4 4▲
• Interval
Enables specifying the cut interval.
• Print Speed
Enables specifying the print speed. Selectable speed differs according to the printer models.
Fine Adjustment
• Set
When the “Set” checkbox is checked, you can set fine adjustment values. When not checked, the
adjustments are grayed out and the printer operates according to its current settings.
Adjustable settings differ depending on the printer models.
• Feed
• Backfeed
• Cut/Strip
• Print Shrinkage
• Feed
Specifies the length of label stock that will feed after printing.
• Backfeed
Specifies the length of label stock that is retracted before printing.
• Cut/Strip
In the case of the cut issue, this specifies the length of label to feed before cutting the label. In the case of
the strip issue, the length of label to feed before peeling the label is specified.
• Print Shrinkage
Used to compensate for label print shrinkage or expansion.
(depending on printers)