Filter
Top Products
User’s Manual 7-5
HW Setup and Passwords
LAN
Wake-up on LAN
This feature lets the computer's power be turned on from shutdown when it
receives a wake-up packet ( Magic packet ) from the LAN.
Power will be automatically turned on when a signal is received from an
administrator's computer which is connected via a network. The following
settings can be changed when the Built-in LAN is Enabled. Connect the
AC adaptor when using the Wake-up on LAN function. The battery
retention time will be shorter than the times listed in this manual when this
function is enabled. Refer to the section in chapter 6, Retaining Data with
Power off.
Built-in LAN
This feature enables or disables the Built-in LAN.
Do not install or remove a memory module while Wake-up on LAN is
enabled.
■ The Wake-up on LAN function consumes power even when the system
is off. Leave the AC adaptor connected while using this feature.
■ Regarding Wake-up on LAN from sleep or hibernation, you must check
the “
Allow the device to wake the computer
” check box within the LAN
Device properties.
( This feafure does not effect the Wake-up on LAN
from sleep or hibernation. )
Enabled Enables Wake-up on LAN from shutdown.
Disabled Disables Wake-up on LAN from shutdown.
(Default)
Enabled Enables built-in LAN functions. (Default)
Disabled Disables built-in LAN functions.