Filter
Top Products
User’s Manual 1-7
Getting Started
Turning On The Power
This section describes how to turn on the power - the Power indicator will
then indicate the status. Please refer to the System Indicators section in
Chapter 6, Power and Power-up Modes for more information.
1. Open the display panel.
2. Press and hold the computer’s power button for two or three seconds.
Figure 1-5 Turning on the power
Starting Up for The First Time
The Windows 7 Startup Screen will be the first screen displayed when you
turn on the power. Follow the on-screen instructions on each screen in
order to properly install the operating system.
Turning Off The Power
The power can be turned off in one of three modes, either Shut Down
Mode, Hibernation Mode or Sleep Mode.
Shut Down Mode
When you turn off the power in Shut Down Mode no data will be saved and
the computer will boot to the operating system's main screen the next time
it is turned on.
■ After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Please refer to the section Starting
Up for The First Time for more information.
■ Volume cannot be adjusted during Windows Setup.
1.POWER BUTTON
When it is displayed, be sure to read the Software License Terms
carefully.