Filter
Top Products
4. MAINTENANCE ENGLISH VERSION EO1-33057
4.1 Cleaning
E4- 7
4.1.5 Optional Cutter Module
1. Loosen the two screws and remove the Cutter Cover.
As the bottom of the Cutter Cover is fitted onto the Cutter Attachment
Screw, slightly lift and detach the Cutter Cover.
2. Remove the White Screw to detach the Media Guide.
3. Remove jammed media, if any.
WARNING!
1. Be sure to turn the power
off before cleaning the
cutter unit.
2. As the cutter blade is
sharp, care should be
taken not to injure yourself
when cleaning.
Cutter Cover
Screw
Cutter Attachmen
t
Screw
White Screw
Media Guide