Toshiba e-STUDIO4500c All in One Printer User Manual


 
Page 10
Setting OHP Transparencies
1. Press the User Tools/Counter key on the control panel.
2. Press System Settings.
3. Press the Tray Paper Settings tab.
4. Press Next to scroll through the list.
5. Press Paper Type: Bypass Tray.
6. Select OHP or Translucent.
7. Press OK. The paper type selected is displayed.
8. Press the User Tools/Counter key.
NOTE: The settings made will remain valid until they are reset again. After printing on OHP
transparencies or thick paper, make sure to clear settings for the next user.