Filter
Top Products
20
2. ENERGY-SAVING FUNCTION
* Power consumption during normal standby
: approx. 284W
● Level 1 is set as the default mode. You can
switch the initial mode depending on user's
environment (see page 119).
The energy-saving function is to save the power consumption by lowering the fuser temperature
while the copier is not being used.
There are two levels for this function.
Forcibly Switching to Energy-saving Mode
Cancelling the Energy-saving Mode
Energy saving
Warm-up time
efficiency
Level 1 approx.50% (142W) approx.5 minutes
Level 2 approx.20% (227W) approx.2 min. 30 sec.
Press the ENERGY SAVER key on the
control panel to forcibly switch to the
energy-saving mode (see page 10).
Press the ENERGY SAVER or START key
on the control panel.
The Energy-saving lamp goes off and the copier
starts warming up again (see page 10).
See the table above for the warm-up time.
INFO