Filter
Top Products
Chapter 3 - Guest Check Functions New Check Prompts
3.2.2 Guest Count
A guest count can be required for the Order Type by the REQ
GUEST CNT flag in the Order Type Table. The Order Type is
determined by the Job Code of the User logged in.
• This setting requires a guest count entry before the check is
sent.
• An additional setting, PROMPT # GUEST in the Station
Setup Table, can require a guest count entry before a menu
item is entered.
A default entry can be assigned to an Order Type using the
DEFAULT GUEST COUNT flag in the Order Type Table, so the
server does not have to make an entry.
This key type does not apply if the workstation is set up to track
check cover by Meal Count rather than Guest Count. That
option is GUEST CNT in the Station Setup Table.
Make sure the {GUEST} key is placed on a screen with a keypad. A
screen select key can be used to display this key before menu items
can be entered.
Procedure
1. Index the number in the party for this guest check.
• Press {GUESTS}.
OR
1. Press {GUESTS}.
2. Screen prompts: Enter guest count
3. Index the number in party and press {TOTAL}.
4. To accept the default guest count, press {TOTAL} without
entering a number first.
FS-3700 Owner’s Manual 3-5