Filter
Top Products
Setup Flow for Printing Features 15
Setup flow for IPP printing (Windows)
This equipment can be used with the IPP printer connection for Windows 2000, Windows XP,
Windows Vista, Windows Server 2003, and Windows Server 2008 in a TCP/IP network. Even
though IPP printing can be used in a local area network, this method is commonly used to print
over the Internet. If you allow IPP printing through the Internet, you must configure the DNS
server to enable users to access this equipment over the Internet using the HTTP protocol. This
is useful when users want to print to this equipment from outside the local area network.
Setup procedure
1
Set up the TCP/IP and the HTTP Network Service to enable TopAc-
cess.
You should set the TCP/IP and HTTP Network Service from the control panel the first
time you use it, to make TopAccess available.
y Setup Guide for Printing Functions
5 CONFIGURING NETWORKS (EQUIPMENT)
TCP/IP Configuration
HTTP Configuration
10 TopAccess ADMINISTRATION TAB PAGE - SETUP MENU (Printing Function)
Setting up Network Settings (Printing Function)
Setting up the TCP/IP
Setting up the HTTP network service
2
Set up the DNS Session to be available the services that use the
DNS name with a DNS server.
The DNS Session should be configured when this equipment accesses the services,
servers, and client computers using the DNS names instead of IP addresses.
y Setup Guide for Printing Functions
10 TopAccess ADMINISTRATION TAB PAGE - SETUP MENU (Printing Function)
Setting up Network Settings (Printing Function)
Setting up the DNS session
Windows 2000
Windows XP
Windows Vista
Windows Server 2003
Windows Server 2008
Connecting over Internet
Setting up the IPP
printer connection