Filter
Top Products
© 2006 - 2011 TOSHIBA TEC CORPORATION All rights reserved GD-1210/1250/1270/1160/1260
PRECAUTIONS FOR INSTALLATION OF FAX UNIT
4 - 1
4
4. PRECAUTIONS FOR INSTALLATION OF FAX UNIT
4.1 Installation of FAX Unit
After unpacking and installing the FAX unit following the unpacking/setup instructions, be sure to per-
form “FAX Clearing Mode / FAX Set Up” described with the same instructions. The unit is not turned ON
without this operation.
[Operation procedure]
Perform the following operation after setting the country/region in 08-201 / 08-9000 *1 and 08-701 / 08-
9001 *1.
*1: For e-STUDIO2040C/2540C/3040C/3540C/4540C, e-STUDIO5540C/6540C/6550C, e-
STUDIO206L/256/306/356/456 and e-STUDIO556/656/756/856.
[1] [∗] [POWER] Æ [100] Æ [START] (It takes about 20 seconds for the digital keys to be operable after
the power is turned ON.) (It takes about 10 seconds until the display changes from ‘100’ to ‘CL’.)
[About FAX Clearing Mode / FAX Set Up]
When “FAX Set Up” is performed, the following operations are performed:
Data in the ID registration, home position stored in the NVRAM and SRAM on the SYS board are
erased. The system setting area is initialized (the settings are reset to the default values.)
11/12