Filter
Top Products
6.SETTING ITEMS
Administrator Settings 109
6 SETTING ITEMS
Setting 2nd Line for FAX Unit
You can make settings so that two lines can be used at the same time using the 2nd Line for FAX Unit (optional) installed.
In addition to the settings described below, you need to:
y Register the terminal ID.
P.103 “Registering the terminal ID”
y Set the dial type.
P.104 “Setting the initial setup”
1
Press [LINE-2 MODE].
2
Set how you want to use the 2nd line, and then press [OK].
TX/RX
The 2nd line is used for both transmission and reception.
RX ONLY (24HR)
The 2nd line is used only for reception.
RX ONLY (TIMER)
The 2nd line is used only for reception during a specified period of time. To move the cursor, use or .
Specify the time period on a 24-hour basis using the digital keys on the control panel.
The automatic reception is only available for the 2nd line.