Filter
Top Products
GN-1010 User’s Manual — Using the Utility Software 23
4.
Click [Read] to load the setting of the device.
5. Click [OK].
•
When the password has been set for the selected device, enter it and
click [OK].
6. Click the appropriate tab and edit the parameters.
•
For detailed information of the configuration menu, refer to the section
"Configuration" (P.26).
7. After the setting is completed, click [Write].
8. Click [Reboot] to restart the GN-1010.
•
After restarting the GN-1010, the setting becomes effective.
•
Click [Read] to check whether the setting becomes effective.