Filter
Top Products
GN-1010 User’s Manual — Functions of the Utility Software 27
Base
This tab sets the IP parameters, wireless parameters and other basic operating settings
for the device.
<Entry Item>
Classifi-
cation
Parameter Default
Value
Description
IP
Parame-
ters
IP Address
(*2)
10.xxx.xxx.x
xx
(*1)
Enters the IP address assigned by the network administra-
tor.
Subnet
Mask
(*2)
255.0.0.0 Enters the subnet mask assigned by the network adminis-
trator.
Default
Gateway
(*2)
0.0.0.0 Enters the IP address of the default gateway.
Wireless
Parame-
ters
Enable DIP
Switch
Disabled Determines whether or not the DIP switch is used.
•
Enabled/Disabled
Network
Mode
Infrastruc-
ture
(Wi-Fi
Mode)
Selects the wireless operating mode.
•
ADHOC (Simple Mode)
•
Infrastructure (Standard Mode)
•
Infrastructure (Wi-Fi Mode)
•
Infrastructure (Advanced Mode)
*
The GN-1010 supports "Infrastructure (Wi-Fi Mode)" only.
Unit Type Station Determines the unit type.
*
Effective only when "Infrastructure" is selected in "Net-
work Mode".
•
Station : Operates as a station (wireless
terminal).
•
Access Point : Operates as an access point.