Filter
Top Products
25
About 1 µs
Exposure period*
2
Exposure period*
2
Tr igger*
1
Negative polarity mode
Positive polarity mode
RGB data
(video interval image)
(Internal VD)
*
3
FVAL
LVAL,
DVAL
20H (
Partial scanning OFF
)
18H (
Partial scanning
120fps)
23H (
Partial scanning
180fps)
(1. 2) 1 Pulse Trigger SYNC-NON RESET Picture Output Timing (at Time of Internal Sync)
*1: Externally input signal
*2: Exposure time is determined by the setting of "7. 2 (1.3) Changing each setting in E.TRG mode".
*3: Video is output at the falling edge of the internal VD following completion of the exposure period.
The video and FVAL/LVAL/DVAL have a paired relationship.
Note:
When the next trigger is input before completion of the output of the video corresponding to the trig-
ger, there will be an effect on the video.
06.11.30, 3:44 PMPage 25