Toshiba L310D Personal Computer User Manual


 
User’s Manual 4-27
Operating Basics
Be sure to close all other software programs except the writing
software.
Do not run software such as a screen saver, which can put a heavy load
on the CPU.
Operate the computer under the power scheme High Performance. Do
not use power-saving features.
Do not write while virus check software is running. Wait for it to finish
and then disable virus detection programs including any software that
checks files automatically in the background.
Do not use hard disc utilities, including those intended to enhance HDD
access speed. They may cause unstable operation and data damage.
Write from the computer's hard disc drive to the CD/DVD. Do not try to
write from shared devices such as a LAN server or any other network
device.
Writing with software other than TOSHIBA Disc Creator is not
recommended.
When writing or rewriting
Please observe/consider the following when you write or rewrite to a CD-R/
-RW, DVD-R/-RW/-RAM or DVD+R/+RW disc.
Do not perform any of the following actions when writing or rewriting:
Change users in the Windows
®
Vista operating system.
Operate the computer for any other function, including using a
mouse or TouchPad or closing/opening the LCD panel.
Start a communication application such as a modem.
Apply impact or vibration to the computer.
Install, remove or connect external devices, including the following:
ExpressCard, USB devices, external display, optical digital devices.
Use the audio/video control buttons to reproduce music or voice.
Open the DVD Super Multi drive.
Do not use shut down/log off and Sleep Mode/Hibernation Mode while
writing or rewriting.
Make sure writing or rewriting is completed before going into Sleep
Mode/Hibernation Mode. Writing is completed if you can open the DVD
Super Multi drive tray.
Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains, or cars. Do not use an unstable
surface such as a stand.
Keep mobile phones and other wireless communication devices away
from the computer.
Always copy data from the hard disk drive to the CD-R/-RW,DVD-R/-
RW/-RAM or DVD+R/+RW disc. Do not use cut-and-paste. The original
data will be lost if there is a write error.