Filter
Top Products
4 Replacement Procedures 4.23 LCD Module
6. Turn the LCD panel over and place it face down on a protective surface, such as a foam
pad.
7. Gently peel the clear connector tape from the back of the LCD panel and disconnect the
LVDS cable connector.
8. Remove the tape and carefully peel the LVDS cable from the back of the LCD panel.
Figure 4.44 Removing the LVDS cable from the LCD panel
NOTE:
Integrated Circuits (ICs) are fragile. Use extreme care not to apply pressure to the ICs along
the edges of the LCD panel.
Dispose of used LCD panels (fluorescent (FL) tubes) as required by local ordinances or
regulations.
[CONFIDENTIAL] Satellite L670/Pro L670 Maintenance Manual