User’s Manual 4-19
Operating Basics
■ While recording video to DVD, please close all other programs.
■ Do not run software like a screen saver because it can put a heavy
load on the CPU.
■ Do not support mp3 decode and encode.
2. Before recording the video to DVD or Blu-ray disc
■ When you record DVD disc or Blu-ray disc, please use only discs
recommended by the Drive manufacturer.
■ Do not set the working drive to a slow device like a USB1.1 hard
disk drive or it will fail to write DVD or Blu-ray disc.
■ Do not perform any of the following actions:
■ Operate the computer for any other function, including using a
mouse or Touch Pad, or closing/opening the display panel.
■ Bump or cause vibration to the computer.
■ Use the Mode control button and Audio/Video control button to
reproduce music or voice.
■ Open the DVD drive.
■ Install, remove or connect external devices, including the following:
SD/SDHC/SDXC memory card, USB device, external display,
optical digital devices.
■ Please verify your disc after recording important data.
■ DVD+R/+RW disc cannot be written in VR format.
■ Not support to output VCD and SVCD format.
3. About recorded DVDs and Blu-ray discs
■ Some DVD-ROM drives for personal computers or other DVD
players may not be able to read DVD-R/+R/-RW/+RW/-RAM discs.
■ When playing your recorded DVD on your computer, please use the
TOSHIBA VIDEO PLAYER.
■ When playing your recorded Blu-ray Disc on your computer, please
use the WinDVD BD for TOSHIBA.
■ If you use an over-used rewritable disc, the full formatting might be
locked. Please use a brand new disc.
■ Some BD-Combo drives for personal computers or other Blu-ray
disc players may not be able to read BD-R/RE discs.
TOSHIBA VIDEO PLAYER
Please be aware of the following limitations when you use the TOSHIBA
VIDEO PLAYER:
Notes on use
■ "TOSHIBA VIDEO PLAYER" software is supported for playback of
DVD-Video and DVD-VR.
■ Frame dropping, audio skipping or out of synch audio and video may
occur during playback of some DVD-Video titles.