Filter
Top Products
2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on
the back of the computer.
Figure 2-3 Connecting the DC output plug to the computer
2
1
1. DC output plug 2. DC IN 19V jack
3. Plug the power cord into a live wall outlet - the Power indicator on the
front of the computer should glow.
Generally you can adjust the LCD screen tilted angle (15~30 degree
vertically) by directly pushing or pulling its upper portion, and the stand
will slide on the table as you do. However, it is recommended to adjust
the stand manually instead of sliding it on the table in case of the
situations below:
The stand may damage the table
The stand cannot slide on the table easily
Be careful not to place your fingers on the hinge between the
computer’s back and the stand as this could cause personal injury
such as the finger pinch.
For models with subwoofer, it is recommended not allow the cables to
be passed from the hole on the stand as this could bring interference.
Connecting the wireless receiver
In order to normally use the wireless keyboard and mouse, make a
connection between the computer and keyboard/mouse firstly, by the
following steps:
1.
Open the wireless receiver cover on your computer.
User's Manual 2-
5