Filter
Top Products
95
Learning the Basics
Using Hibernation
5.375 x 8.375 ver 2.3
Set this option to Shut down if you want the
computer to turn off when you slide the power
button.
6 Click Apply.
7 Click OK to close the TOSHIBA Power Saver Properties
window, then close the Control Panel.
Starting again after Turn Off or Shut down
To start the computer up again, slide and release the power
button; the on/off light changes to green.
Using Hibernation
Enabling the Hibernation command
Hibernation is a default setting. If it should become disabled,
you can enable it as follows:
1 Right-click the mouse on the Toshiba Power Saver icon
located in the System Task Tray.
2 Click Hibernate.
3 Click Enable.
Going into Hibernation mode
If you are not connected to a Windows
®
network server
(domain server), power off the computer using the
Hibernation command as follows:
1 Click Start, Turn off computer.
The Turn off computer window appears.