Filter
Top Products
1 Hardware Overview 1.2 System Unit
1-12 Tecra A3/S2 Series Maintenance Manual
? HRTF 3D positional audio.
? 3D Stereo Enhancement.
TI PCI7411 Card Bus Host Adapter
? 3.3V operation with 5V Tolerance
? The PCI7411 controller is availble in the 288-terminal MicroStar BGA
package(GHK).
? Compliant with
? PCI Local Bus Specification, Revision 2.3.
? PCI Bus Power Management Interface Specification Revision 1.1
? Windows Logo Program 2.0 compliant.
? Intel Mobile Power Guideline 2000.
? Advanced Configuration and Power Interface(ACPI) Specification,
Revision 2.0.
? PC 98/99 and PC2001.
? PC Card Standard 8.1.
? 1394 Open Host Controller Interface Specification 1.1.
? Provisions of IEEE Std 1394-1995 for a high-performance serial bus and
IEEE Std 1394a-2000.
? Interrupt configuration
? Many interrupt modes supported.
? Supports serialized IRQ with PCI interrupts.
? Supports PC Card or CardBus with hot insertion and removal.
? Supports 132-MBps burst transfers to maximize data throughput on both the PCI
bus and the CardBus.
? Supports ring indicate , SUSPEND#, and PCI CLKRUN# protocols and PCI bus
Lock(Lock#).
? Fully interoperable with FireWire and i.LINK implementations of IEEE Std 1394.
? Two IEEE Std 1394a-2000 fully compliant cable ports at 100M bits/s, 200M bits/s,
and 400M bits/s.
? Universal PCI interfaces compatible with 3.3V and 5V PCI signaling environments.
? 1.5V core logic and 3.3V I/O cells with internal voltage regulator to generate 1.5V
core Vcc.
? PCI power-management D0, D1, D2, and D3 power states.
? Advanced submicron, low-power CMOS technology.
? Isochronous receive dual-buffer mode.
? Node power class information signaling for system power management.
? PCI burst transfers and deep FIFOs to tolerate large host latency.
? Separate cable bias(TPBIAS) for each port.
? Register access fail interrupt when the PHY SCLK is not active.