![](http://pdfasset.owneriq.net/8/17/817a6ef7-95e3-41d2-bf85-25f604be9010/817a6ef7-95e3-41d2-bf85-25f604be9010-bg22.png)
MR-3018/3020/3021/3022 © 2005 - 2011 TOSHIBA TEC CORPORATION All rights reserved
DESCRIPTION OF OPERATIONS
3 - 20
3.4.7 Drive Circuit for Gate Solenoid
Fig. 3-12
Gate solenoid driven by the driver transistor (Q1) is a solenoid which is used to switch an original into
the reverse tray when in the duplex scanning mode.
When the GSOL-ON-Signal level is set to “L”, the reverse flap goes down and the original is trans-
ported to the reverse tray.