Filter
Top Products
© 2005 - 2011 TOSHIBA TEC CORPORATION All rights reserved MR-3018/3020/3021/3022
DISASSEMBLY AND ASSEMBLY
4 - 9
4
[D] Separation roller [PM]
(1) Take off the paper feeder unit.
( P. 4-6 "[A] Paper feeder unit")
(2) Remove 2 screws. Slide the feeder upper
guide to the right and raise it.
Note: Note:
Do not pull the harness out with too much
force.
Fig. 4-23
(3) Remove 2 screws and take off the separation
roller holder and separation roller unit.
Fig. 4-24
(4) Remove 1 bushing and clip, and then take off
the separation roller.
Fig. 4-25
Feeder upper guide
Separation roller unit
Separation roller holder
Separation roller
Bushing
Clip
05/12