Filter
Top Products
8-5
OPTIONAL DEVICES
SD cards
Removing an SD card
To remove an SD card, follow the steps below.
1. Click the Safety Remove Hardware icon on the Task Bar.
2. Point to SD card and click.
3. Push in the card and release it to pop the card out slightly.
4. Grasp the card and remove it.
Figure 8-4 Removing an SD card
CAUTIONS: 1. Make sure the SD card indicator is out before you
remove the card or turn off the computer’s power. If
you remove the card or turn off the power while the
computer is accessing the card you may lose data or
damage the card.
2. Do not remove an SD card while the computer is in
Standby or Hibernation mode. The computer could
become unstable or data in the SD card could be lost.
SD card care
CAUTION: Set the write-protect switch to the lock position, if you do not
want to record data.
1. Do not write to an SD card if the battery power is low. Low power could affect
writing accuracy.
2. Do not remove an SD card while read/write is in progress.
3. The SD card is designed so that it can be inserted only one way. Do not try to
force the card into the slot.
SD CARD
SD CARD
INDICATOR