Filter
Top Products
70
Getting Started
Using external display devices
To locate your RGB port, please refer to your Quick Start document.
You can change the display settings by pressing the () + P keys,
or by configuring the display properties settings.
Connecting an external monitor via the DisplayPort™
(Available on certain models.)
You may need to change the input selection on your monitor to
DisplayPort.
To connect a DisplayPort™-compatible monitor to your computer,
read the directions that came with your monitor.
Directing the display output when you turn on the computer
Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.
You may need to change the input on your television or external
display device. See the User’s manual for your external display
device.
Some modes are only available with the appropriate device attached
and turned on.
The quickest way to change the display output settings is to use the
() +
P keys:
Press the ( ) +
P keys repeatedly until the setting you want takes
effect. Briefly pause each time you press the ( ) +
P keys to allow
time for the display to change.
NOTE
NOTE
NOTE
NOTE
NOTE