Filter
Top Products
E6581315
65
Monitor parameters *These Parameters are read-only (monitor-only) parameters.
Communication No.
Current
value
Trip data held
Function Unit Remarks
FC00 Monitor of key data (Effective
data)
FC01 Monitor of inverter keypad data
Refer to Section
8.3.
FC90 Trip code
FC91 Alarm code
FD00 FE00 Output frequency 0.01Hz
FD01 FE01 Inverter status 1
Refer to Section
8.2.
FD02 FE02 Frequency command value 0.01Hz
FD03 FE03 Output current 0.01%
FD04 FE04 Input voltage (DC detection) 0.01%
FD05 FE05 Output voltage 0.01%
FD06 FE06 Input terminal information
FD07 FE07 Output terminal information
Refer to Section
8.2.
FE08 CPU version 1 (application)
FE10 Past trip 1 (latest)
FE11 Past trip 2
FE12 Past trip 3
FE13 Past trip 4 (earliest)
Refer to Section
8.2.
FE14 Cumulative operation time 1h
FD15 FE15 Compensated frequency 0.01Hz
FD16 FE16 Speed feedback (real time) 0.01Hz
FD17 FE17 Speed feedback (1-sec. filter) 0.01Hz
FD18 FE18 Torque 0.01%
FD19 FE19 Torque command 0.01%
FD20 FE20 Torque current 0.01%
FD21 FE21 Exciting current 0.01%
FD22 FE22 PID feedback value 0.01Hz
FD23 FE23 Motor overload factor (OL2 data) 0.01%
FD24 FE24 Inverter overload factor (OL1
data)
0.01%
FD25 FE25 Regenerative braking resistance
overload factor (OLr data)
1%
FD26 FE26 Motor load factor 1%
FD27 FE27 Inverter load factor 1%
FD28 FE28 Regenerative braking resistance
load factor
1%
FD29 FE29 Input power 0.01kW
FD30 FE30 Output power 0.01kW
FE35 RR/S4 input 0.01%
FE36 VI/II input 0.01%
FE37 RX input 0.01%
FE38 Option AI1 0.01%
FE39 Option AI2 0.01%
Refer to Section
8.2.
FD42 FE42 Inverter status 2 Refer to Section
8.2.
FE43 MON1 output (analog option 1)
FE44 MON2 output (analog option 2)
FD45 FE45 Command mode status
FD46 FE46 Frequency setting mode status
Refer to Section
8.2.
FD48 FE48 PID command 0.01Hz
FD49 FE49 Inverter status 3 Refer to Section
8.2.