Filter
Top Products
3-22 User’s Manual
TECRA A9, TECRA S5, Satellite Pro S200, Satellite Pro A150
7. Grasp the module by its edges and remove it from the computer.
Removing the memory module
8. Seat the memory module cover in place and secure it with one screw.
9. Install the battery pack - refer to Replacing the battery pack section in
Chapter 6, Power and Power-Up Modes, if required.
10. Turn your computer over.
Battery Charger
The battery charger provides a convenient way to charge battery packs
without requiring the use of your computer. The battery charger holds up to
two battery packs (lithium ion).
■ If you use the computer for a long time, the memory modules and the
circuits locating close to the memory modules will become hot. In this
case, let them cool to room temperature before you replace them. Or
you will get burnt if you touch any of them.
■ Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
Latches
Slot B
Slot A
Take care to ensure that the memory module cover is firmly closed.