Filter
Top Products
If a Supervisor Password has been set, manual boot device selection
functions may be restricted.
The boot device selection methods described above will not change the
boot priority settings that have been configured in HW Setup. In addition, if
you press a key other than one of those listed, or if the selected device is
not installed, the system will continue to boot according to the current and
available settings in HW Setup.
Boot speed
This feature allows you to select system boot-up speed.
Fast Reduces system boot-up time. System can boot
only from the built-in HDD and only internal LCD
and keyboard are supported during the boot
process.
Normal System boots up at normal speed. (Default)
Panel Open - Power On
This feature allows you to change the Panel Open - Power On setting.
Enabled Enables the Panel Open - Power On function.
When you open the display panel while your
computer is turned off, the system will boot up
automatically.
Disabled Disables the Panel Open - Power On function.
(Default)
The Panel Open - Power On feature is supported with some models.
Keyboard
This tab allows you to set conditions for the Keyboard.
Function Keys mode (without pressing FN first)
This feature allows you to configure the Function Keys Mode. For the Hot
key functions can be performed, please refer to the Hot keys section in
Chapter 3, Operating Basics.
Special function
mode
Press the function key by itself to use special
functions. Hold FN first to use standard F1-F12
functions.
Standard F1-F12
mode
Press the function key by itself to use standard
F1-F12 functions. Hold FN first to use special
functions.
User's Manual 4-18