Filter
Top Products
User’s Manual G-4
TOSHIBA PC Health Monitor
5. Using a thin-tipped tool, push on the hole in the edge of the Cooling
module cover and slide it in the direction of the arrow to remove.
Figure G-1 Removing the cooling module cover
6. Lift the plastic film and clean the cooling module using a vacuum
cleaner or other cleaning tool.
Figure G-2 Lift the plastic film
7. Slide the Cooling module cover back into place on the computer to
reattach.
8. Install the battery pack (refer to the Replacing the battery pack section
in Chapter 6, Power and Power-Up Modes, if required).
9. Turn your computer over.
Cooling module
cover
Hole
Do not use a ball pen, cotton swap or similar to remove dust. If these touch
the inside of the computer, it could be damaged or become clogged,
leading to further problems.
Plastic film