Filter
Top Products
Chapter 2 Troubleshooting Procedures
Procedure 4 Connector Check and Replacement Check
tive. Otherwise, they may be faulty. Disassemble the computer
following instructions in Chapter 4, Replacement Procedures and perform the following
ly connected to the connector(s) on the system
board.
HDD(s) is/are connected to the connector(s) on the system board. The connection of HDD(s)
and board may be defec
checks.
Check 1 Make sure HDD(s) is/are firm
If an the connections are loose, ly and repeat Procedure 1. If the
prob still occurs, go to Check
Check 2 (One of) HDD(s) may be faulty. Replace it with a new one following the
instr ons in Chapter 4, Repl d check the operation. If the
prob still occurs, perform Check
Check 3 Syst oard may be faulty. Replac ew one following the instructions
in Chapter 4, Replacement Proced
y of reconnect firm
lem 2.
ucti acement Procedures an
lem 3.
em b e it with a n
ures.
Satellite T110 / Satellite Pro T110 / PORTEGE T110 Maintenance Manual (960-Q08)
17