25
Operations
Turning the power on and off
Connecting the power cord
Plug the power cord into the adaptor.
Insert the power cord connector into the DC IN socket of the
projector or install the battery pack.
Switching the power on (I)
Switch the power button to turn on the projector, then the power indicator on the LED
lights green, and the start-up screen appears.
CAUTION
• Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.
• Do not look into the lens while the projector is on. The light from the projector may cause dam-
age to your eyes or sight.
Start-up screen
Note
• The start-up screen will disappear after a moment. You can also configure the start-up
screen not to appear via the Default setting menu .
Switching the power off (O)
Switch the power off will shut off the power immediately.
