Toshiba TDP-FF1A Projector User Manual


 
34
Placement of the projection screen
Using the screen
Please follow the steps below to set up the screen.
Open the screen fully, and pull out the stand on the back of the screen and fasten the
fastener.
Fold out the bottom of the screen and set up the screen vertically. The image can be
projected fully on the attached screen when the distance between the projector and the
screen is about 80 cm.
Notes
• Place the projector and the screen on a flat place; assure they are stable.
• Image quality can be changed due to the viewing angle to the screen.
• The surface of the screen is covered with a special coating. Do not stain it, scratch it
or write anything on it.
1 2