Filter
Top Products
31
Operations
Slideshow
Start slideshow
• Quick Start
When the projector sets to the USB input and ‘Quick start’ to ‘on’ , the slideshow
starts with jpeg files in the root folder of the USB memory.
• Start from file view mode
When a jpeg file is selected in the file view mode, slideshow starts from the selected jpeg
file.
Slideshow operation
In the slideshow mode, jpeg files display on the screen fully. To change the files, select
or . The picture displayed in the same order as displayed in the file view mode.
It takes several seconds to display the next slide. appears when reading the next file.
The reading time varies and depends on the file size.
When ‘Slideshow’ sets to ‘Auto’ in the Default setting menu , the slide changed
automatically when displaying. Display time also can be changed in ‘Interval’ setting in the
Default setting menu . Interval time doesn’t include reading time of the next file,
so it takes longer to display the next picture than the setting. Slideshow can be paused by
pressing even in auto mode. Pause can be cancelled by pressing . again.
After showing the last jpeg picture,
will be shown in the picture. This indicates the end of
the slideshow. Press or , the slideshow ends and the projector enters in the file view
mode.
When ‘slideshow loop’ sets to ‘On’, the slideshow starts from the first file again after
displaying the last file.
When jpeg file has a error or unsupported format,
appears on the current picture and
the projector automatically starts to read the next jpeg file.
Picture transition effect is available in the slideshow. The following four modes can be
selected in ‘Display effect’ in the default setting menu.
• None: displays screen without special effects.
• Dissolve: adds dissolve effect to screen.
• Wipe: screen scrolls in from the top or bottom.
• Cover: screen overlaps previous image.