Filter
Top Products
29
Operations
Using handy features (Continued)
1
Select [Password] in the Default setting menu and press the
button.
The password setting screen is displayed
2
Select [On] and press .
3
Enter a 4 digit number for the password using numeric key of the
remote control.
The input number appears as [****].
4
Re-enter the same password for confirmation.
When the password is confirmed the setting is complete and the password be-
comes [On].
If the password is wrong repeat the procedure from step
3
.
How to operate when password is [On]
1
Turn on the power.
2
The lamp lights and the password entry screen appears.
3
Enter the password using numeric keys of the remote control.
If the entered password is correct, the start-up screen appears and the projec-
tor goes into normal operation. If the password is wrong, a message appears to
prompt you to re-enter the password. If you enter a wrong password for more than
5 times, the projector will automatically power off and enter standby mode.
How to cancel password (from [On] to [Off])
1
Select [Password] in the Default setting menu and press the
button.
The password entry screen is displayed.
2
Enter the password using numeric key of the remote control.
3
Select [Off] and press the menu button.
The [Password] is canceled and becomes [Off].
Note
• The password entry screen appears when the power is turned back on only after
the power cord is unplugged.
If you forgot the password, please inquire your dealer.