Toshiba TDP-S8 Projector User Manual


 
39
Others
Trouble indications
The indicator lights inform you of interminal abnormalities.
No power
Problem with projector
• Unplug the power cord, and contact your dealer.
Lamp went out during use, or won’t come on
Lamp temperature is high so that it is difficult to turn on, the lifetime of
the lamp has ended or the projector is malfunctioning.
• Unplug the power cord and wait for a short while, then turn the power
back on.
• If a lamp burns out, replace it with a new one.
After approx. 5 second of abnormal display, the projector returns to
the standby state waiting for internal cool down.
Power went out during use
Internal overheating, or the outside temperature is too high.
• Place the projector so that the air intake and exhaust are not
blocked.
• Unplug the power cord and wait for a short while, then turn the power
back on.
The icon will appear before the power goes out.
After approx. 5 second of abnormal display, the projector returns to
the standby state waiting for internal cool down.
Power went out during use
Problem with internal cooling fan.
• Unplug the power cord, and contact your dealer.
The icon will appear before the power goes out.
After approx. 5 second of abnormal display, the projector returns to
the standby state waiting for internal cool down.
Power went out during use
Problem inside the projector.
• Unplug the power cord and wait for a short while, then turn the power
back on.
• If the above action will not clear the problem, unplug the power cord,
and contact your dealer.
The icon will appear before the power goes out.
After approx. 5 second of abnormal display, the projector returns to
the standby state waiting for internal cool down.
POWER
(Red lit)
(Red lit)
POWER
POWER
POWER
FLASH
POWER
FLASH
FLASH