Filter
Top Products
User’s Manual 7-11
HW Setup & BIOS Setup
(To access it, Power Options -> Change plan settings -> Change advanced
power settings -> Battery)
The operation of this function is dependent upon battery status.
LCD Display Stretch
Select the display function of the computer's display panel.
Security controller
Please note that the security controller settings are available on the second
page of the BIOS setup application.
TPM
This setting enables or disables the computer's Trusted Platform Module
(TPM) security controller.
Clear TPM Owner
This setting is used to erase the data stored as part of the Trusted Platform
Module, as would be required, for example, when disposing of the
computer or when the owner of the computer changes. Once this operation
is carried out, the Trusted Platform Module configuration settings are
erased such that any encrypted data can no longer be decrypted and the
files can no longer be read. In view of this you must ensure that you backup
or delete the data as necessary before carrying out this operation.
The Critical Battery Wake-up only operates with Windows Vista™.
Enabled When the remaining battery power is about to run
out while the system is in Sleep Mode, the
system is automatically woken up and then
switched to Hibernation Mode (Default).
Disabled No action is taken even if the remaining battery
power is about to run out while the system is in
Sleep Mode.
The LCD Display Stretch is supported with some models.
Enabled Display modes with low resolution are stretched
and displayed (Default).
Disabled Display modes with low resolution are not
stretched and displayed in their original state.
Enabled Enable Trusted Platform Module security.
Disabled Disable Trusted Platform Module security
(default).