Filter
Top Products
User’s Manual 7-12
HW Setup & BIOS Setup
The procedure to follow is as detailed below:
1. Move the cursor to the Clear TPM Owner setting and press either the
Space key or BACK SPACE key.
2. A message is displayed at which you should press the Y, E, S, and
ENTER keys in sequence - the Trusted Platform Module information will
then be erased.
3. The Trusted Platform Module setting will then change from being
Enable to Disabled and the setting no longer displayed.
Diagnostic Mode
Allows you to set whether the BIOS diagnostic test is enabled or disabled.
When using TPM, please refer to the Infineon TPM Installation Guide
from the C:\TOSAPINS\Infineon TPM Installation Guide and
ensure that the user reads as it contains usage information and notes on
using TPM security.
Disabled The diagnostic test is disabled (Default).
Enabled The diagnostic test is enabled.