Filter
Top Products
TIC-LF494B
12
Table 5. Specification Code (Sanitary type detector LF490 Series)
Model Specification Code Type
1 2 3 4 5 6 7 8 9 10 11 12 13 14
Description
Normal Ex. type
L F 4 9 0 Normal specification type √
L F 4 9 4 Hazardous location certification type (Note 1) √
Meter size (Clamp size)
E 1"(25mm) (2S) √ √
F 1 1/2"(40mm) (2 1/2S) √ √
G 2"(50mm) (3S) √ √
H 3"(80mm) (4S) √ √
J 4"(100mm) (5 1/2S) √ √
Mounting Style
L Detector/Converter combined type (LF490/LF610) √
M Detector/Converter separate type (LF490/LF612) √
cFMus class I, Division 2 (Note 1)
A Detector/Converter combined type (LF494/LF610F) √
B Detector/Converter separate type (LF494/LF612F) √
Connection method
A Sanitary clamp type (ISO 2852) (Note 2)
Z Other
–
Electrode Material (Note 5)
B 316L stainless steel
Z Other
–
Lining and Sealing materials (gaskets) (Note 5)
S Teflon PFA and Silicone rubber
Piping connection parts (ferrules, clamps) (Note 2, 3, 5)
A No ferrule and no clamp
B Normal type of Ferrules (304 stainless steel) with no clamp
C Normal type of Ferrules (304 stainless steel) with clamp
D Long type of Ferrules (304 stainless steel) with no clamp
E Long type of Ferrules (304 stainless steel) with clamp
Z Other
–
Flow and calibration velocity range
A 1.0 to 32.8 ft/s (standard range calibration)
B 1.0 to 32.8 ft/s (specified range calibration)
C 0.3 to 32.8 ft/s (specified range calibration)
Excitation and Signal Cables
A not provided
B 30 m cable, provided (Note 4)
C other lengths, provided (Note 4)
Coating (Note 6)
A no coating
F
Z
3A approved type
Other
–
–
Size code explanation: √ : Object : Standard : Option
–
: Not available
Note1: Cable glands are not provided. Refer to the part of “Cable connection port” at detector and converter.
Note2: Tri-clamp® is available to use the same joint size instead of ISO2852 clamp except meter size 100mm (4").
Note3: Toshiba’s original ferrule is required to use for LF490 series detectors to keep just fitting between the joint in case
of choosing clamp type.
Note4: Applies to the separate type flowmeter only. Specifying the code C, indicate the length of cable from 1 to 300m in
1 meter increments.
Note5: Consult Toshiba before ordering when choose materials at the wetting parts.
Note6: LF494 have only 3A approved type.